I recently upgraded the firmware on my QNAP NAS from QTS 4.2.x to 4.3.x, and in doing so Plex stopped working. It was difficult to find information online to fix the problem, so I figured I’d write this short post on how to fix the issue.
Tag Archives: NAS
Setting QNAP NAS to shutdown on UPS battery power
Posted by Jarrod Farncomb
on January 28, 2015
7 comments
Over the last week my area has received a lot of electrical storms, the most recent of which knocked out the power for a split second causing the UPS to fail over to battery power which saved me losing what I was working on. I’ve had this UPS for a few years now and it’s definitely been worth every dollar and then some, if you don’t already have one I suggest you look into investing in one.
Earlier this year I purchased a QNAP TS-870 8 bay NAS which is plugged into the CyberPower UPS as I don’t want to risk data corruption should the power go out. However when the UPS failed over to battery on the most recent instance, it made me consider what would happen if the power went out while I was not at home to safely shut things down. I run the NAS 24/7 so if the power went out for an extended period of time while I was out or asleep the NAS would almost certainly drain the battery of the UPS then shut off without correctly shutting down.
As the majority of my data is now stored on the NAS this would be an unacceptable option, so I have instead configured the NAS to safely shutdown when it detects that the UPS is using its battery.